Avoiding thermal bridges

Thermal bridges occur where heat flows more easily through the building envelope than through the surrounding areas. They often appear at junctions between walls and roofs or floors, around windows, at balconies and canopies, or wherever structural elements interrupt the insulation.

Thorough examination of dozens of details in order to be  identified and reduced thermal bridging, Water house, Blagoevgrad A Photo taken from thermographic camera showing series of thermal bridges
A passive house (on the right) in accordance with an old house (behind the trees) from a thermographic photo Finding thermal bridges in the building’s structures with a thermographic camera

Why we avoid them

Thermal bridges increase heat loss and make it harder to achieve low energy demand. They can lower the temperature of interior surfaces and make areas near external walls, corners and windows feel cold. The building loses energy, and occupants lose some of the comfort that a well-insulated envelope should provide.

Low surface temperatures also increase the risk of moisture problems. Under the right conditions, water vapour can condense on a surface or inside a building component. Persistent moisture can lead to mould and damage to construction materials. Condensation does not occur at every thermal bridge, but the risk increases when a detail cools a surface and indoor humidity remains high.

Building regulations and the Passive House standard

General building regulations do not set a universal goal of eliminating every thermal bridge. They do require designers to account for thermal bridges when assessing a building’s energy performance and to revise details when their values exceed the reference limits. For a Passive House, designers follow the fundamental principle of avoiding thermal bridges wherever possible. When a detail makes a thermal bridge unavoidable, the designer calculates it and includes its effect in the energy balance. Bulgarian Regulation No. RD-02-20-3 accounts for thermal bridges through linear thermal transmittance values, while the Passivhaus Institut criteria require designers to document these values for certification.

We address thermal bridges mainly through design

The most important work starts during the design stage. At that point, we can choose a structural system and develop the junctions between building elements to keep the insulation as continuous as possible. During construction, the contractors must follow these details accurately. Good workmanship preserves the quality of the design, but it cannot make up for a missing or poorly developed detail.

At architectural studio Apxe, we analyse critical junctions from the early design stages and develop them in the construction documents. We check details at the foundations, façade, roof, windows and balconies. When necessary, we calculate each detail’s linear thermal transmittance with suitable two-dimensional or three-dimensional thermal simulation software.


Thermal bridge analysis of installed wood frame window in detail

We then enter the calculated values in the PHPP energy model. This lets us account for thermal bridges in the building’s total heat losses and assess their impact on its energy performance.

Precise details and careful construction supervision help us reduce heat loss, maintain warmer interior surfaces and lower the risk of condensation and mould. This work plays an important part in the comfort and durability of a Passive House.